The success of the laser printer lies in the fact that it is fast and very economical. However, it happens that the device can break down and a jam phenomenon occurs at the time of printing. It also happens that the toner is poorly positioned. The device becomes dirty and the rendering on the device is catastrophic. These problems indicate that your printer needs cleaning. If this is not done in time, it could worsen the condition of the printer. If you have just purchased your printer and need to clean it, this article can help you. You can find all the right steps to properly clean your laser printer.
Basic cleaning of the laser printer
Over time, the printer may accumulate dirt that can impact the proper functioning of the device. For this, it is essential to clean the printer regularly. Otherwise, it could impact the quality of the print. Dirt can also damage the device.
To do this, you must completely disassemble the device, after turning it off. You must then wait for the device to cool down before you can handle them. It is also important to unplug the connection frame to avoid accidents. There are printer cleaning kits on the market. If you cannot get one, you can use a lint-free cloth to clean the printer components. The cloth must be dry to gently remove large dirt particles. You can clean the rollers and paper compartments. Do not forget the print heads which tend to get dirty. When doing a quick cleaning, you must pay attention to cleaning the exposure unit. These elements are very fragile and can be damaged by the slightest mistake. Do not forget the transfer belt. To avoid the appearance of lines on the paper.
Cleaning the printer drum
The drum can get dirty over time. When stains appear on the printing paper, it means that the drum needs to be cleaned. This part of the printer is very sensitive. You need to be careful when cleaning it. If you are a clumsy person, you should call a professional to do it. If you want to clean the laser printer drum yourself, you should avoid rushing. You can use the device’s manual to help you understand what to do to avoid damaging the drum during cleaning.
Removing Toner Powders from the Corona Wire
The Corona wire is subjected to high tension which promotes the deposition of powders on the toner.
This is why it is important to clean the corona wire regularly to prevent stains from appearing on the paper during printing. It is also a sensitive component. You should take your time during the cleaning process.
To avoid accidents, it is essential to turn off and unplug the laser printer. You must then open the cover to access the drum and the toner cartridge. It must be removed carefully and cleaned on a surface protected by a newspaper for example. Remove any traces of powder that may be scattered on your hands with water. Under no circumstances should you touch the Corona wire, to prevent the static electricity from your body from damaging the printer. Use the device’s instructions to help you with the steps to follow. Clean the fixing unit.
The fusing unit allows the toner to bond to the paper. It consists of three main parts: the pressure roller, the fuser roller, and the heater. The heater transmits heat to the fuser roller to allow the toner to melt. The toner bonds as the paper passes from the pressure roller to the fuser roller. Cleaning the fusing unit improves the life of your printer.
After unplugging the device and waiting for the device to cool down, you need to remove the fixing unit that is located at the back of the device. You should then place it on a flat surface that you have previously protected with newspaper. You can use a vacuum cleaner to get rid of large particles. Make sure to put all the components back in place to ensure the proper functioning of the laser printer.
